Installation method of bag type panel frame air filter

The installation method of bag type panel frame air filter needs to follow certain steps and precautions to ensure its correct installation and effective operation. During the installation process, special attention should be paid to environmental preparation, tool preparation, specification verification, installation steps, testing and operation, as well as maintenance and upkeep.

The following are installation steps and precautions compiled from multiple sources of information:
1、 Preparation before installation
Tool preparation: Ensure basic tools such as screwdrivers, wrenches, rulers, etc. are available for installation and debugging.
Environmental preparation: Ensure that the work area is dust-free before installation to avoid contaminating the new filter. At the same time, choose a well ventilated, dust free, and easy to maintain location for installation, avoiding proximity to heat sources or direct sunlight.
Check specifications: Select filter bags that match the size and filtration grade based on the equipment model and manufacturer's recommendations. Open the packaging and confirm if the filter bag model and size match the equipment.
2、 Installation steps
Installation frame: Fix the filter frame onto the equipment, ensuring it is level and securely fastened at all connection points. If there are flanges on both sides of the device, force transmission joints and shock absorbers can be installed to ensure even force distribution.
Install filter bag: Place the filter bag into the frame, ensuring that it is aligned correctly and free of wrinkles. Filter bags are divided into front and back sides, and should be installed correctly according to instructions to avoid incorrect airflow direction. Then fix the filter bag with a snap ring or clip to prevent it from loosening during operation.
Sealed interface: Use sealing tape or sealing components to seal the gap between the filter bag and the frame to prevent leakage and dust spread. The connecting parts should also be sealed with sealing tape or flanges to ensure sealing.
3、 Testing and Running
Exhaust test: When starting for the first time, exhaust operation should be carried out until clean air is discharged to confirm that the filter is installed correctly and has good sealing.
Test run: After installation is complete, turn on the device for testing, check for air leakage, and confirm whether the filtering effect meets the requirements.
4、 Maintenance and upkeep
Regular inspection: Regularly check the pressure difference and cleanliness of the filter bag, and replace or clean the filter bag according to the manufacturer's recommended replacement cycle.
Recording and Training: Record installation dates and maintenance status, provide training to operators to ensure proper operation and maintenance of equipment.
5、 Precautions
Avoid contamination: During installation, be careful to avoid contaminating or damaging the filter bag.
Safe operation: Follow the specific installation guidelines and safety operating procedures provided by the equipment manufacturer to ensure safe operation.
Special scenarios: For certain special application scenarios, such as dusty working conditions, horizontal installation or other special installation methods may need to be considered. But in general, it is recommended to install bag filters vertically to ensure the best filtration effect and operating efficiency.